Skip to content

What Is A Plumber?

That is a very good question and the answer might surprise a lot of people When people think of plumbers they typically think of a guy in overalls with a monkey wrench who tightens fittings to stop leaks and carries and industrial size plunger to unclog toilets. While it is true a plumber is responsible for doing such things they also do a whole lot more than that. Lets take a look at all the things a plumber must do well in order get their jobs done. Here is a list of duties that a plumber performs that will help define what is a plumber.


Before any plumber can leave the shop they must make sure that their truck is fully loaded with all the supplies they will need to have for the days jobs. They must also make sure they have the tools on board to do job and commonly used tools too in case something else needs to be done that was unexpected.

If we asked many people what a plumber is not many people would say they are a driver but it is actually something a plumber must be very skilled at. Plumbers do not have their work come to them so they must go to it and in order to do that they must navigate their way to the job in their service vehicle. Anyone

Customer Service Rep

What is a plumber? It is a person that must be skilled at handling customers in a courteous and informational way. They must call their customers if they are running late so that customer does not get angry waiting and they also must greet the customer and then establish a rapport with them while they are doing the work.

Often times a plumber does not know what the root problem is that is causing the customer to need to call them to come out and do a repair. In that case the plumber must be able to go to a job and diagnose what the problem is and then chart a course of action to do the repair.


No plumber can proceed with a repair unless the customer knows what the cost of that repair is and if they can afford to pay for it. After a plumber has diagnosed the problem then must then work up an estimate that the customer can look at and give them the approval to go ahead with the work.

Repair Person

Of course you can hardly define what is a plumber without mentioning the many different kinds of service work they perform on a routine basis. They do everything from cleaning clogged up sewer lines to replacing a broken faucet.

Accountant/PR Rep

No job is complete without payment so the plumber must next add up the bill and present it to the customer for payment. Once this is done they will then need to provide any additional the customer needs to know and bid then goodbye.

A plumber truly is a person that wears many different hats all under one title.

6 Tips In Choosing Local Painters For Your Home

Choosing among local painters can give you unexpected headaches as they always market themselves as the best. They try to complicate things by throwing in some wow factors, like unique procedures and exclusive materials. However, the selection process can actually be simplified. All you need is to stick with these guidelines.

Before Hiring

1. Compare prices using the specified work.

A common mistake many people commit when comparing prices of different local painters is comparing by service. It is easy to see who offers the most affordable and most expensive services this way, but painters usually change prices according to the demands of the work. Hence, prices wont matter if your demands vary from their package.

A more accurate method of comparison is by presenting the specific work requirements to all local painters you check out so that they can estimate all the material expenses and labor costs. Specify which areas you want them to work on, how fast (expedited work usually means additional charges), what color and gloss you prefer, what additional materials you want to add, and what painting techniques you want to use.

2. Have all price quotes written or sent to you.

Not all local painters understand the value of integrity. A dishonest few would suddenly change prices upon seeing the actual work area, usually due to wrong estimations and plain dishonesty. For your own interest, have everything written and recorded.

3. Ask for proposals.

Not all local painters will be too excited to give you ideas before hiring them, but you need to know even the basics. These basics include the surface preparation of the wall and what process to do; the brands of paint they are going to use; the process of priming; and the number of coats per surface. It is also wise to ask what specific additional service they can recommend probably for aesthetic purposes.

You need to do your own research about industry standards so that youll know when the local painters you are talking with are giving you more or less.

4. Look at their past work/clients.

You need to know the quality of work they rendered in the past through past projects. It is even better if they can give contacts of clients for you to ask recommendations from.

After Hiring

5. Ask how they plan to protect your assets.

Many people ask about the set-up because they are more concerned about what machines and equipment are going in and out of their houses. Does it really matter? The real concern should be how your house and the rest of your assets will be protected against possible damages from the procedure.

How will the local painters separate the work area from the rest? What things should be moved out of your house? What protection will be used to cover the floor and fixed furniture? 6. Get the work schedule.

Know how many people will be in your house and when will they be working. You need that to fix your own schedule and have someone supervise the house. There should also be a timetable so youll know when they are ahead or behind schedule for every phase of the project.

The Benefits Of Hydronic Heating

There are a lot of different ways to heat your home. If you look at all these different home heating methods you can usually find benefits and drawbacks with each one. For example, home heating with oil is very efficient but it can be expensive at times if oil prices go way up. One of the more interesting and newer methods of heating your home is by using what is called hydronic heating. Here is a little bit more information about hydronic heating.

What Is Hydronic Heating?

This is the type of heating that uses a heat source to heat up water or another fluid that then passes through pipes in your floor, walls or other places until it gets to a point where that heat is released. The water or fluid in the system does not make up the source of the heat or its delivery system; it is merely the means with which the heat is conveyed to its destination point. Once the heat in the water or fluid gets to its final destination it will then be released by what is called a heat emitter such as a radiator or baseboard heaters.

What are some of the Benefits of Hydronic Heating?

Here is a list of some of the major benefits of hydronic heating:

Energy Efficient and Environmentally Friendly

It is a radiant type of heat which tends to be among the most energy efficient forms of heating because there is not a lot of waste involved. It produces virtually no pollution in its delivery of heat and it has a very low carbon footprint for those that use this type of heat.

Fills a Room Completely with Heat

Hydronic heat systems add greatly to the comfort level in a room they heat; they do this by heating not only the air in the room but also by heating the floors or walls that the system passes through also. It helps to keep the entire room at the set temperature of the system. Since it is a radiant type heat there are no cold air pockets in the room and this also helps to increase the comfort level of each room in your home.

It has Additional Uses

Hydronic heat has a lot of other uses also. Homes that use this type of heating system can do such things with it as use it to heaty the water in there hone (it generates and endless supply of hot water with no bulky storage tank that can leak or break) or heat the water used in your swimming pool.

Its a Closed System

It is a very sanitary form of heat because the system is closed and it does not allow the buildup of bacteria, mold or other unhealthy substances. Systems that use things such as forced air for delivery often have to be cleaned periodically in order to remove accumulated dust and unhealthy substances.

You can expect to see more and more new home owners add this type of heating system to their homes in the future.

Tips to Get Rid of Common Household Odors

There is a smell in every house. It may be the smell of anything , perfume, the food that you cook, aftershave or the typical smell of the people living in the house. When you keep the windows closed, the room starts to smell. If its a good smell, well and good but a bad odor can affect how much you enjoy your stay at home. While it may not be possible to completely eliminate the odor but you can do certain things to freshen up your home. Here are some tips while you are doing your house cleaning

Thoroughly clean your home with a strong cleaning solution by paying special attention to areas you normally ignore such as inside of cabinets and under sinks etc. Wipe down the doors, walls, baseboards and counter tops with equal amount of bleach and water.

Let the air enter each of the room by opening up the windows once in a while. When you open the windows odors from curtains, furniture and carpets release in the air thus letting the fresh air to blow in. Keep the windows open for about an hour.

To remove odors from carpet and furniture sprinkle baking soda onto fabric surfaces. Let it sit there for some hours or overnight for good absorption. Next day, using a vacuum cleaner pull out the baking soda from the carpet and furniture.

To keep your disposal smell-free put some ice in the disposal and grind it well. You can also mix a handful of baking soda with warm water and pour it into the sink. Let it remain there for some minutes with the help of a stopper. Then turn on the disposal and immediately pull out the stopper. This creates suction which pulls the baking soda down the disposal and clears the system.

To give your room a nice smell, fill a big bowl with fresh coffee grounds. Leave the bowl overnight in the room after closing the windows. The coffee grounds will absorb the odor of the room. For stronger odors, repeat the same process for one more night with fresh coffee grounds.

If its the refrigerator that is giving out the stinky smell, put an open box of baking soda in one of the shelves to trap odors. For stinky freezer, you can put one up in there too. Chemical air fresheners are not so effective and can be toxic to human beings. It is always better to try for healthier ways to get rid of the common household odor and introduce pleasant smell.

The Different Types Of Stores That Carry The Plumbing Supplies You Need

Plumbing supplies are something that you will have the need to purchase at some time in your life. It can be something as simple as finding new guts for the inner workings of your toilet or finding something as complicated as a tankless water heater to put on your natural gas furnace. When you need these things you will have to know where to go to find them. Here are some typical types of businesses that carry a variety of plumbing supplies.

Plumbing Specialty Stores

Of course for the obvious choice to get plumbing supplies you would go to a plumbing specialty store. Many of these will specialize in certain types of plumbing such as sewers and drains, household plumbing supplies or industrial plumbing supplies. The advantage of going to these types of plumbing supply stores is they are usually experts in the type of plumbing supplies they carry and have very skilled personnel that will assist you and give you advice on how best to complete your plumbing task.

Home Improvement Centers

These are large warehouses that specialize in providing a big variety of things that both consumers and contractors need; they typically have very large plumbing sections which carry all types of plumbing supplies, pipe and fixtures that can help you do something as small as re-caulking your bathroom or a large project like replacing an entire broken toilet. Often times their personnel have at least a decent plumbing background and can give you some guidance or tips on how to do your plumbing project.

Hardware Stores

These are another type of store that typically carries a variety of plumbing supplies. Although they do not have isle after isle of plumbing supplies like a home improvement center they will still carry a lot of regularly used plumbing items. You will be able to find bath fixtures, replacement toilet parts and different sizes of pipe to fix leaks and broken lines too. As like the home improvement centers their personnel often have some type of plumbing background.

Lawn and Garden Centers

These types of specialty stores often carry plumbing supplies that are needed outside the house. They will have carry such plumbing parts as drainage pipe and sleeves, yard sprinkler system parts and different kinds of hose bibs and PEX pipe to attach to your house.

Industrial Supply Stores

These stores will carry those plumbing supplies that are needed on a regular basis by industrial buildings and power plants. They will normally have such things as sprinkler system parts, high and low pressure line parts and complex fittings for use in industrial processes. Quite often they have expert staff on hand that can help answer any questions you may have or give you other advice on such things as installation tips or the proper sealants to use with different types of pipe materials.

If you have a plumbing supplies need there clearly is a good variety of places to get these parts. A quick internet search should help you find a place that sells plumbing supplies near you.

How To Choose The Perfect Air Conditioning System For Your Home

When it comes to choosing cooling and heating systems, you should consider far more than just your available budget. The only way get an optimal amount of efficiency from your air conditioning system is by choosing equipment that is properly sized for your property. An option that is too big or too small will use way more energy than necessary to establish comfortable indoor temperatures.

AC companies can come into your home and take a measurement of your property, to learn about such companies visit this website. This will allow them to determine how many BTUs or British Thermal Units your AC will need to have. They can then shop for an install your unit on your behalf, which is especially important if this setup involves complex electrical wiring and modifications to the property such as cutting holes into the wall.

If you are shopping on your own, then you probably want a very basic, standalone unit. These are commonly referred to as portable air conditioners. You can take these systems with you from room to room, however, they will need to be vented so that warm air is routed outdoors rather than exhausted outside. Many of the top models come with their own including venting kits just for this purpose.

Other non-permanent or semi-permanent options include window AC units. Like portable models, these are typically meant for cooling small spaces like single rooms or apartments that have just two rooms. These are affixed in the window sill and are automatically vented outside. They are relatively heavy and must be firmly secured in place in order to prevent injury. Thus, although you can install a window unit on your own, it is always best to get help. It is also important to note that these models must be covered or removed and stored during the winter months in order to prevent exposure to the elements.

In order to get a unit that has heating and cooling functionality, you will need to opt for a multi-split or central system. These can be routed to individual rooms, however, a multi-split will allow you to set individual temperatures for each room, so that you are never paying money to cool or heat spaces that you aren't using. This is not a feature that central systems boast.

If you are purely looking for heating functionality, you can also consider baseboard wall heaters. These are relatively inexpensive to install and much like mini-split AC units that both heat and cool, you can set temperatures in each zone or area of the home individually. Given the wealth of options that you have to choose from, working with seasoned professionals is often the best way to streamline and simplify the selection process.